What are tipper trucks used for?

A tipper truck is a heavy goods vehicle (HGV) that has a tipper body on its rear. Commonly referred to as dump trucks, tipper trucks are used to help the construction world complete projects quickly, efficiently and safely. The job of a tipper truck is to lift and transport loose building materials such as asphalt, construction aggregate, dirt, grain, gravel, sand, snow and wood chips in bulk efficiently around a worksite. So let’s delve into how tipper trucks operate, so you can better understand how they’re used.
 

To prevent damage to the equipment and personal injury, every operator needs to remember the following:

• Loading operation – if a tailor is disconnected from the tractor, it should not be loaded with cargo as this can cause it to overturn

• Always load a tipper truck evenly – distribution is important when filling the tipper body, as this too ensures it doesn’t overturn.

• Before unloading the material inside the tipper body, the tractor must be firmly grounded and the tailor and tractor need to be perfectly aligned.

• Before fully alleviating the tipper body into the air – you need to make sure it does not come into contact with obstructions such as trees or overhead power lines. Also, make sure that the semi-trailer pneumatic suspension has a lowered air suspension before raising the tipper.

• Once you’re sure that all appropriate checks have been made, it’s time to unload the cargo. This needs to be done continuously in one fluid motion – do not increase the vehicle’s RPM whilst unloading.

• When tipping the materials, it must be checked that there isn’t a blockage at the rear of the tipper. If this is not checked and there is a blockage, the tipper could turn over.

• If the load is blocked and the body of the tipper is elevated, do not be tempted to jerk the body or drive forwards whilst in the lifted position.

• The cylinder should only lift and lower the tipper body in order to release the construction materials. Once this process has been completed, the body must be lowered promptly after. Never drive around with the tipper up in the air – driving with the cylinder lifted can affect the vehicle’s stability.

• During the operation, the cylinder should not be put through the effect of lateral forces. A tipper cylinder should not be extended more than 30 minutes at a time.

• Do not go underneath an extended tipper body – after unloading the trailer retract the cylinder fully.

• After 1 min, set the tipping control to neutral.

• Ensuring proper use of the hydraulic system will ensure effective use of the tipper system.

• Unauthorised use of a tipper and adjustments to the pressure settings is prohibited. 

StackPath

Please Enable Cookies

www.forconstructionpros.com is using a security service for protection against online attacks. The service requires full cookie support in order to view this website.

Please enable cookies on your browser and try again.

8 Semi-Trailer Types & What They're Used For

Trucking accounts for over 70% of all freight transported in the United States and is the preferred method of shipping most goods. While the truck may be the engine, the trailer carries the load and it’s important to select a compatible trailer to do the job at hand.

There are a wide variety of semi-trailer types available and depending on your load or freight, one will suit your needs better than another. Finding the right trailer for your job will make all the difference in ensuring the success of your project and facilitating the safe arrival of your goods. With this guide you’ll learn about the most common semi-trailer types and what each type is used for.

1. Flatbed Trailers

Flatbed trailers offer versatility and as a result are some of the most commonly used trailers. The name stems from the fact that flatbed trailers have a flat deck that is open on all sides and does not have a roof or a box to cover the load. This open layout makes it an easy trailer to load and unload but does not protect cargo from the elements of weather and roads. Flatbed trailers are perfect for shipping wide or large items as the load can be lifted from above with a crane or from the side with a forklift.

Flatbed Trailer Typical Cargo Types:

• Construction materials
• Heavy equipment and machinery
• Oversized or unusually shaped loads
• Lumber

Flatbed Trailer Legal Load Specifications:

• Flatbed Trailer Maximum Freight Weight: 48,000 lbs.
• Flatbed Trailer Maximum Freight Dimensions:
  • Maximum Trailer Length: 48 ft. – 53 ft.
  • Maximum Trailer Width: 8.5 ft.
  • Maximum Legal Freight Height: 8.5 ft.

2. Step Deck or Drop Deck Trailers

Step deck trailers, also known as drop deck trailers, are similar to flatbed trailers in that they are an open trailer but do have some differences. While flatbed trailers have only one level, step deck trailers have two deck levels that are known as the upper deck and lower deck.

The upper deck measures between 10 and 13 feet long and sits above the tractor unit. The lower deck measures between 38 and 40 feet long and sits a mere 3 feet and 3 inches above the ground. This lowered deck affords step deck trailers the ability to haul taller loads.

Step Deck or Drop Deck Trailer Typical Cargo Types:

• Tall cargo that exceeds legal height limit on traditional flatbed trailer

Step Deck or Drop Deck Trailer Legal Load Specifications:

• Step Deck Trailer Maximum Freight Weight: 48,000 lbs.
• Step Deck Trailer Maximum Freight Dimensions:
  • Maximum Trailer Length: 48 ft. – 53 ft.
  • Maximum Trailer Width: 8.5 ft.
  • Maximum Legal Freight Height: 10 ft.

3. Lowboy Trailers

Lowboy trailers are also known as double drop trailers because they have two drops in deck height that allow for an extremely low deck. The first drop is right after the gooseneck and the second drop is before the wheels. This additional dropdown feature is what makes lowboy trailers ideal for moving taller equipment without needing to obtain height permits.

Another advantage to lowboy trailers is that increased weight capacity can be achieved by adding extra axles. If you’re looking to haul large equipment such as bulldozers or other construction equipment, a lowboy trailer may be exactly what you’re looking for.

Lowboy Trailer Typical Cargo Types:

• Bulldozers
• Excavators
• Backhoe loaders
• Heavy machinery
• Oversized items

Lowboy Trailer Legal Load Specifications:

• Lowboy Trailer Maximum Freight Weight: 40,000 lbs. (with two axles) and up to 80,000 lbs. (with extra axles)
• Lowboy Trailer Maximum Freight Dimensions:
  • Maximum Well Length: 24 ft. – 29.6 ft.
  • Maximum Well Height: 18 in. – 24 in.
  • Maximum Trailer Width: 8.5 ft.
  • Maximum Legal Freight Height: 11.5 ft. – 12 ft.
  • Maximum Legal Overall Load Height: 14 ft.

4. Reefer Trailers

Reefer trailers, also known as refrigerated trailers, are built with insulation and temperature controls. Typically, these trailers use refrigeration to enable the transport of perishable, chilled or frozen products, but they can also protect temperature-sensitive goods from frigid outside weather.

Reefer Trailer Typical Cargo Types:

• Produce
• Meat, poultry, fish, dairy
• Pharmaceuticals
• Plants and florals

Reefer Trailer Legal Load Specifications:

• Reefer Trailer Maximum Freight Weight: 42,000 lbs. – 45,000 lbs.
• Reefer Trailer Maximum Freight Dimensions:
  • Maximum Trailer Length: 48 ft. – 53 ft.
  • Maximum Trailer Width: 8.2 ft.
  • Maximum Legal Trailer Height: 8 ft.

5. Dump Trailers

Dump trailers are a type of hauling trailer that use hydraulics to lift the trailer bed up and tilt it to unload heavy hauls with ease and the help of gravity. Although dump trailers are oftentimes confused with dump trucks, dump trailers allow you to customize the trailer size to correspond to your load. Dump trailers are less expensive than dump trucks but still offer the ability to haul heavy payloads safely and efficiently.

You’ll find dump trailers are available with a frame or frameless. Frameless dump trailers allow for heavier payloads because they’re made of aluminum and are lighter weight. Steel frame dump trailers are a great choice for larger hauls, like equipment and large boulders.

Another thing to consider when selecting a dump trailer is the style of dumping. It’s helpful to compare end dump vs. side dump vs. bottom dump trailers so you know which one is the right one for your project.

Dump Trailer Typical Cargo Types:

• Gravel
• Sand
• Stone
• Fill dirt
• Trash
• Branches

Dump Trailer Legal Load Specifications:

• Dump Trailer Maximum Freight Weight: Dependent on local regulations
• Dump Trailer Maximum Freight Dimensions:
  • Maximum Trailer Length: 45 feet
  • Maximum Trailer Width: 8.5 ft.
  • Maximum Legal Trailer Height: 13’6”

End Dump Trailers

End dump trailers operate the same way most dump trucks do and unload cargo out of the rear of the trailer while the front of the trailer is lifted into the air. Because the load is shifted out of the bed of the trailer by gravity, the front of the box needs to be lifted high enough to encourage this movement to happen. This raised position lends itself to some instability and may be worsened by uneven ground or shifted loads. End dumps are not used to haul liquids because it’s difficult to make the rear gate watertight.

Side Dump Trailers

Side dump trailers are a newer concept developed to resolve the instability issues of end dump trailers. By tilting the trailer to one side to unload cargo, side dump trailers offer greater stability regardless of even and uneven ground. Side dump trailers allow operators to safely haul and release a variety of materials with a more rapid dump cycle.

Bottom Dump Trailers

Bottom dump trailers, also known as belly dump trailers, unload material directly from the bottom of the box. Most models today use a “clam shell” type of dump gate so that the contents can be windrowed, or released in a low ridge, long line instead of a single pile. Bottom dump trailers are not suitable for all types of materials considering fine material and liquid will likely leak out and the axles of the trailer must be able to clear the windrow.

6. Dry Van Trailers

Dry van trailers, also known as enclosed or box trailers, are fully enclosed and are used for shipping non-perishable goods. Although there is no temperature control, the cargo is protected from the elements of weather and roads. Freight is loaded at the rear of the dry van trailer and a loading dock is commonly used. Some dry van trailers also allow freight to be loaded from the side of the trailer.

Dry Van Trailer Typical Cargo Types:

• Non-perishable food and beverages
• Clothing and household goods
• Building products
• LTL shipping

Dry Van Trailer Legal Load Specifications:

• Dry Van Trailer Maximum Freight Weight: 42,000 lbs. – 45,000 lbs.
• Dry Van Trailer Maximum Freight Dimensions:
  • Maximum Trailer Length: 48 ft. – 53 ft.
  • Maximum Trailer Width: 8.2 ft.
  • Maximum Legal Freight Height: 8 ft.

7. Tanker Trailers

Tanker trailers are typically used to transport liquid and are manufactured from aluminum or stainless steel. Recognized by their unique shape, tanker trailers are cylindrical, and this is for good reason. Tanker trucks are built with a cylinder shape because this takes pressure off the tank itself, provides a lower center of gravity, prevents a liquid surge, and allows for easier extraction and cleaning.

Tanker Trailer Typical Cargo Types:

• Asphalt
• Chemicals
• Petroleum/Fuel
• Dry food
• Beverages

Tanker Trailer Legal Load Specifications:

• Tanker Trailer Maximum Gross Weight: 80,000 lbs.
• Tanker Trailer Maximum Freight Dimensions:
  • Maximum Trailer Length: 48 ft. – 53 ft.
  • Maximum Trailer Width: 8.5 ft.
  • Maximum Legal Freight Height: 13.5 ft.

There are a multiple types of tanker trailers and each one has a specific purpose.

Asphalt Tankers

Asphalt tankers offer superior temperature control along with insulation and at times a heating device. These traits provide the right environment for contents that need to be kept hot.

Petroleum Tankers

Petroleum tankers are usually always made of aluminum and range in size from 5,000 to 10,000 gallons. While some fuel tankers have one single compartment, most current tankers have multiple compartments so different grades of the same product may be loaded at the same time. Large plates with holes called tanker baffles are installed inside petroleum tankers to control fuel surge while in transit.

Pneumatic Tankers

Pneumatic tankers, also called dry bulk tanks, are emptied with a pump and blower using forced air. Product is unloaded beneath the tanker itself with a series of cone-shaped hoppers that are vacuum-sealed and fully enclosed. Pneumatic tankers are ideal for transporting materials such as dry sand, dry food, and chemicals.

Stainless Tankers

Stainless tankers are made of stainless steel and provide the highest level of protection from impurities. Ideal for storing de-mineralized water, highly refined products, corrosive materials, and highly pure materials, these also used as food tankers.

8. Tipper Trailers

Tipper trailers do exactly what their name suggests: tip to let gravity empty the load. These trailers use hydraulics to raise and tilt their platform. Perfect for hauling and dumping large debris, tipper trailers work well for bricks, rocks, gravel, and other heavy materials. Available in a wide variety of sizes and capacities, tipper trailers are highly desirable for any garbage removal or construction project.

Tipper Trailer Typical Cargo Types:

• Construction debris
• Agricultural materials
• Recycling items

Tipper Trailer Legal Load Specifications:

• Tipper Trailer Maximum Freight Weight: 42,000 lbs. – 45,000 lbs.
• Tipper Trailer Maximum Freight Dimensions:
  • Maximum Trailer Length: 43 ft. – 58 ft.
  • Maximum Trailer Width: 8.5 ft.
  • Maximum Legal Freight Height: 8 ft.

Find the Semi-Trailer You Need at Hale Trailer

Now that you know about the most common types of semi-trailers, you have a better understanding of which commercial trailer type works best for your needs. Whether you’re looking to rent or buy, Hale Trailer Brake & Wheel, Inc. has the largest selection of semi-trailer types. Browse our selection of new and used semi-trailers online or stop in at one of our convenient locations near you.

Our knowledgeable team has extensive experience helping owners, operators, and fleet managers select the perfect equipment for any trucking job. Contact Hale Trailer today to find the semi-trailer that’s right for your project!